Apollo HVLP - Turbine Accessories

Turbine Accessories

Engineering Excellence in Every Part

It makes sense that every accessory made by Apollo Sprayers International Inc., is designed and machined to the same precision, the same high quality, and the same passion for perfection that we put in our spray guns and turbine systems. When you need a part to help you maintain your equipment, or expand its utility, depend on the best— genuine Apollo accessories.

4500 2 Quart (2 Liter) Fluid Feed System.

Description: Designed to be used with Apollo turbine systems: models 825, 900, 1025 and 1100. Excellent in the shop or on site. Perfect for that larger job when a quart (litre) is just not enough or when greater spray gun mobility is needed to get into a tight corner.

Includes: oil-less mini air compressor, 2 quart (2 litre) non-stick coated pressure pot with stainless steel material tube, 20’ (6m) fluid hose, air blanking screw and 4 wheels for easy mobility.

4550 Mobile Cart and Fluid Feed System w 20' hose

Description: Designed to be used with Apollo turbine systems: models 825, 900, and 1025. Excellent in the shop or on site. Perfect for larger jobs when a quart (litre) is just not enough or when greater spray gun mobility is needed to get into a tight corner. 2.5 gallon (10 litre) pressure pot non-stick coated inside and out, with stainless steel fluid parts throughout. Large wheels provide easier mobility when going up and down stairs or curbs.

Includes: 2.5 gallon (10 litre) Deluxe Pressure Pot, oil-less mini air compressor, 20’ (6m) fluid hose, air blanking screw and cart.

4550 Mobile Cart and Fluid Feed System w 30' hose

Includes: 2.5 gallon (10 litre) Deluxe Pressure Pot, oil-less mini air compressor, 30’ (9m) fluid hose, air blanking screw and cart.

External Air Relief Valve

Description: Use when adding our 7500T Series non-bleed spray gun to older model Apollo turbines or any turbine system not equipped with an internal air relief valve. Simply screw this fitting onto your turbine air outlet and in seconds you are able to use a non-bleed spray gun without damaging your turbine motor. Order part #A7538.

Includes: 1 External Air Relief Valve

A4227 - "Y" Connector

Description: Designed for use with all Apollo turbine systems. The Y-Connector allows a single gun turbine system to be used with two spray guns at the same time. Order part #A4227.

Includes: 1 "Y" Connector

A4129 - Replacement Filters for 700 & 725

Description: Replacement filters (2) for your Apollo turbine model 700 & 725. Replace filters as recommended in the manual and always use genuine Apollo brand filters for the best protection.

Includes: 2 filters

A4171 - Replacement Filters for 800, 825, 900, 1000, 1000SE, 1025

Description: Replacement filters (2) for your Apollo turbine model 800, 825, 900, 1000, 1000SE & 1025. Replace filters as recommended in the manual and always use genuine Apollo brand filters for the best protection.

Includes: 2 filters

A4153 - Replacement Filters for 1100 & 1025

Description: Replacement filters (5) for your Apollo turbine model 1100 & 1025. Replace filters as recommended in the manual and always use genuine Apollo brand filters for the best protection.

Includes: 5 filters

A4058 - Replacement Pre-Filters for 700 & 725

Description: Replacement pre-filters (2) for your Apollo turbine model 700 & 725. Replace filters as recommended in the manual and always use genuine Apollo brand filters for the best protection.

Includes: 2 filters

A4096 - Replacement Pre-Filters for 800, 825, 900, 1000, 1000SE, 1025

Description: Replacement pre-filters (2) for your Apollo turbine model 800, 825, 900, 1000, 1000SE & 1025. Replace filters as recommended in the manual and always use genuine Apollo brand filters for the best protection.

Includes: 2 filters

A4095 - Replacement Pre-Filter for 1100 & 1025

Description: Replacement pre-filter (1) for your Apollo turbine model 1100 & 1025. Replace filters as recommended in the manual and always use genuine Apollo brand filters for the best protection.

Includes: 1 filter

A2113 - Genuine Apollo Fluid Hose 6' x 1/4"

Description: 6' long x 1/4" (6mm) diameter heavy duty lined fluid hose complete with zinc coated fluid couplers.